GPS Tracker Installation & Wiring Guides

Welcome to the Keep Track GPS Installation Hub. Here you’ll find wiring references, safety notes, and professional tips for installing our wired and battery-powered trackers. All devices are shipped pre-configured and ready to activate.

Installation Guides by Device

Select your tracker below to view full wiring diagrams, setup instructions, and installation safety notes.

Arrow Global BLE

Wired BLE gateway tracker for fleet vehicles.

View Guide

G70 Wired GPS Tracker

Hardwired 4G tracker for vehicles and equipment.

View Guide

Dart3 Vehicle Tracker

Compact GPS tracker for light vehicles and utes.

View Guide

G150 Hybrid (4G + Iridium)

Satellite-fallback tracker for remote operations.

View Guide

Installer Safety Notes

Before performing any wiring or installation work, always observe the following safety guidelines:

• Disconnect vehicle power before wiring to avoid shorts or airbag deployment.
• Use a proper fuse tap or dedicated circuit for the power connection.
• Ground connections must be made to clean, unpainted chassis metal.
• Protect wiring with conduit and cable ties, avoiding sharp edges or heat sources.
• Verify ignition and output functions before vehicle reassembly.

Professional Installation

For installations involving immobilisation or advanced wiring, we recommend using a certified automotive installer. Keep Track GPS can coordinate nationwide installation through our trusted partners.

For your own peace of mind, always check that your installer has valid insurance and trade qualifications.