KeepTrack G62

IP67 WATERPROOF AND RUGGED GPS TRACKER

 

KTGPS-G62-wired-vechicle-tracker

The KT G62 is a rugged, compact and waterproof GPS tracking device available for 4G LTE-CatM1 and NB-IoT networks globally.

The electronics, backup battery and antennas are all located within the tough nylon-glass housing offering the ability to track and monitor any asset in the most demanding conditions.

With the internal GPS and cellular antenna installation is a breeze. The internal backup battery provides alerts and tracking operations even when external power is removed.

 

 

 

  • All weather applications
  • Rugged weather proof housing
  • Easy install & Easy to conceal
  • Compact 3G or 4G GPS
  • Variety of inputs and outputs
  • Great for equipment location and run hours
Download Data Sheet
  • Applications

    • Vehicle and Fleet Tracking
    • Anchoring and Security of Assets
    • Rental Equipment
    • Mining Equipment
    • Earth Moving Equipment
    • Run Hour Monitoring
    • Lighting Plants, Pumps, Generators
  • FEATURES

    • IP67 Rated
    • High Sensitivity GPS with LNA
    • IP67 water and dust proof
    • 4G LTE Cat-M1 and NB-IoT
    • 3D Accelerometer
    • Internal backup battery
    • 1 x Ignition Input
    • 2 x Digital Inputs
    • 1 x Analog Input
    • 1 x Digital Output
    • Driver ID (1-wire iButton)
  • SPECIFICATIONS:

    Rugged IP67 rated housing:

    Nylon Glass Composite housing protects against the elements.

    This allows the G62 to be installed internally or externally on any asset in the most demanding conditions.

    Dimensions (mm):

    L 125 x W 80 x H 25mm

    Operating Temperature:

    -20°C to +60°C 1) On external power Below 0°C and above +40°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.

    Harness:

    7 wire harness

    POWER:

    Automotive Power:

    8V to 36V DC (max)

    Back-up Battery:

    200mAh LiPo internal backup battery pack.

    The G62 can also be supplied with 1100mAh battery 

    Self-resetting fuse:

    The G62 passes stringent automotive power “load dump” tests to ensure that it will continue to operate in the harshest electrical systems.

    A built-in self-resetting fuse makes installation easy and safe.


    Other:

    Internal Memory:

    Sufficient memory to store over 50,000 records.

    Normally data is sent to the server immediately but if the device is out of range there is space to ensure no data is lost – for many weeks of driving!

    3-axis accelerometer:

    Allows the G62 to detect harsh driving events, and to go to ‘sleep’ when not moving, resulting in extremely low standby current


    GPS TRACKING:

    GPS and Cellular Antenna:

    Internal GPS and cellular antennas tuned by RF laboratories for optimal performance.

    Having the antennas inside the housing makes for very simple and quick installation.

    GPS/GLONASS Tracking:

    U-Blox EVA-M8Q, High sensitivity assisted GPS receiver with TCXO, 72 channel (-167dBm)

    Assistnow Offline:

    Assistnow Offline aiding data for extremely fast time-to-first-fix and performance in urban canyon environments.

    Low Noise GPS Amplifier (LNA):

    GPS signals are boosted by a special low-noise amplifier (LNA).

    This allows operation where normal units will fail to receive GPS signal – like in a container stack!


    CONNECTIVITY:

    SIM Size:

    Micro (3FF) size cellular SIM card

    4G Modem:

    UBLOX SARA-R410-02B This modem can be configured to operate on either LTE-CatM1 or LTE-NB1 networks.

    Supported LTE bands: 1-5, 6, 8, 12, 13, 17, 19, 20, 25, 26, 28


    INPUTS AND OUTPUTS:

    3 x Digital Inputs:

    1 x Ignition input, permanent internal pull down, 0-50V 2 x Digital Inputs, configurable pull-up/pull-down, 0-50V

    1 x Digital Output:

    1 x Switched Ground digital output1, easily wired up to switch external lights, relays, buzzers etc.

    Can be used to immobilise a vehicle. 1) Shared with Analogue Input, meaning only 1 can be used at a time.

    1 x Analogue Input:

    0-30V Analogue input2 2) Shared with Digital Output, meaning only 1 can be used at a time.

    iButton:

    Low cost 1-wire iButton reader can be used for Driver-ID

    FIRMWARE SMARTS:

    Flexible Logging Parameters:

    The G62 trip logging is flexible and can be configured to log based on a variety of parameters including.
    • Elapsed time
    • Distance travelled
    • Change in heading
    • Change in speed
    • On Stationary
    • Accelerometer events (harsh driving)

    Accident and Rollover Detection:

    The G62 uses the built-in accelerometer to detect high G impacts such as accidents and rollovers and reports these events to the server for emergency alerting.

    Harsh Driving:

    The G62 automatically calibrates its built-in 3 axis accelerometer and uses this to detect harsh driving events.
    • Excessive acceleration
    • Harsh braking
    • Cornering at speed
    These events are logged in the G62 along with additional event statistics that allow back-end server platforms to perform sophisticated driver profiling and scoring.

    Accident Data:

    The G62 keeps a second-by-second “black box” recording of valuable GPS and accelerometer data for a two hour window.

    This data can be automatically uploaded to the server when an accident is detected, or it can be requested manually.

    Geo-Fences:

    The G62 has the capacity to hold hundreds of geo-fences that can be downloaded to it from the server. The G62 can use this geo-fence information to.
    • Implement arrival and departure alerts
    • Implement speeding zones with audible warning alerts
    • Implement “No-go” and “Keep-out” areas
    • Automatically control outputs, e.g. to switch on warning lights when inside a special area.

    Ignition Detection:

    The G62 can determine a trip has started based upon:
    • Wired Ignition input (voltage on/off)
    • Emulated Ignition (GPS movement)
    • Run Detect (Voltage Increases)
  • RFID Driver ID Reader.(G62 & G100)

    The Compact unit incorporates a 125kHZ RFID Reader which reads a variety of cards and keyfobs.

     Simply plug into the device harness to install and works with a range programmable driver id key-fobs and cards.

    • 5cm typical read range (can read through plastic / dashboard)
    • Plugs into the DMCAN peripheral plug on the KeepTrack Dart harness for easy installation
    • Includes a LED and buzzer for reminding drivers to swipe their card
    • Compatible with the EM4001 RFID standard
    • Optional 125kHz HID reader option
    https://cdn.shopify.com/s/files/1/1706/2393/files/RFID_Driver_ID_Reader.jpg?6503887393958392301

 

Subscribe